Optima® 3极过载保护模块 - OPM-NG-
Fuse Holders and Blocks - Optima®
three-pole overcurrent protection module
OPM-NG-
Specifications
Decription:
OPM-NG-SC3: 3-pole Class CC fuse holder for use with Class CC fuses (Cooper Bussmann Types LP-CC, FNQ-R, KTK-R).
OPM-NG-SM3: 3-pole fuse holder for use with 13/32@ x 11/2@ and 10.3 x 38mm fuses (Cooper Bussmann Types: 13/32@ x 11/2i; KTK, FNQ, KLM, 10 x 38mm; FWA, FWC, C10G_ _, C10M_ _).
OPM-NG-SM3: 3-pole fuse holder for use with 13/32@ x 11/2@ and 10.3 x 38mm fuses (Cooper Bussmann Types: 13/32@ x 11/2i; KTK, FNQ, KLM, 10 x 38mm; FWA, FWC, C10G_ _, C10M_ _).
Ratings:
Agency Information:
CE, UL; OPM-NG-SC3 UL Listed, UL 512, File E14853, Guide IZLT. OPM-NG-SM3, UL Recognized, UL512, File E14853, Guide IZLT2. CSA Certified, C22.2 No. 39, Class C6225-01, File 47235. IEC 60947-3 Utilization Category AC20B.
Features and Benefits:
@ 45mm width matches IEC starters, 35mm DIN rail or panel mounting feature. Maximum screw size #8 (M4)
@ Pressure plate terminations with dual-wire rated terminals (see Wire Table) and optional auxiliary contacts
@ Integrated collapsible handle and fuse carrier cannot be removed from holder base
@ Padlockable and IP-20 finger-safe to IEC60529
@ Pressure plate terminations with dual-wire rated terminals (see Wire Table) and optional auxiliary contacts
@ Integrated collapsible handle and fuse carrier cannot be removed from holder base
@ Padlockable and IP-20 finger-safe to IEC60529
Typical Applications:
@ Mass Produced Control Systems
@ Process Control Systems
@ Automated Warehouse Systems
@ Individual Control Circuits
@ Process Control Systems
@ Automated Warehouse Systems
@ Individual Control Circuits
Fuse holder Wire Range:
o 75/CU Only
o #18-12 Single/Dual, torque 15in-lb
o #10-8 Single/Dual, torque 20in-lb
o Dual wire with same gauge and type
o #18-12 Single/Dual, torque 15in-lb
o #10-8 Single/Dual, torque 20in-lb
o Dual wire with same gauge and type
Handling & Storage Temperature:
-10/-65/C.
Materials:
| o Housing: Thermoplastic - UL V-2 | |
| o Clip: Tin-plated copper alloy | |
| o Contact lubricant: Fluoroether grease | |
| o Saddle screw: Plated steel | |
| o DIN rail springs: Stainless steel |
Input Power Terminal Wire Range:
| Wiring | Solid Conductor | (1) #14 to #2 (1.5 to 25mm2) or conductor (2)#14 to #6 (1.5 to 10mm2) conductors |
| Wiring | Standard Conductor | 1) #14 to #2 (1.5 to 25mm2) conductor or (2)#12 to #6 (2.5 to 10mm2) conductors |
| Tightening Torque | Connector Screw Clamp | 20in-lb (2.2 Nim) 15in-lb (1.7 Nim) |
Data Sheet:
| Catalog Number | Optional Accessories |
| OPMNGSA245 | Comb Bar (Max current rating = 63A) 2 circuit, 45mm between same phases |
| OPMNGSA254 | Comb Bar (Max current rating = 63A) 2 circuit, 54mm between same phases |
| OPMNGSA272 | Comb Bar (Max current rating = 63A) 2 circuit, 72mm between same phases |
| OPMNGSA345 | Comb Bar (Max current rating = 63A) 3 circuit, 45mm between same phases |
| OPMNGSA354 | Comb Bar (Max current rating = 63A) 3 circuit, 54mm between same phases |
| OPMNGSA445 | Comb Bar (Max current rating = 63A) 4 circuit, 45mm between same phases |
| OPMNGSA454 | Comb Bar (Max current rating = 63A) 4 circuit, 54mm between same phases |
| OPMNGSA472 | Comb Bar (Max current rating = 63A) 4 circuit, 72mm between same phases |
| OPMNGSA554 | Comb Bar (Max current rating = 63A) 5 circuit, 54mm between same phases |
| OPMNGSA005 | Input Terminal Block (Max current rating = 63A) Input/Feed Through Power Terminal, Supports feed through to another system, DIN-rail mount only |
| OPMNGSA009 | Input Terminal Block (Max current rating = 63A) Input Power Terminal |
| OPMNGSA010 | Cover Protective Cover for unused terminals on comb bar |
| OPMNGSAAUX11 | Auxiliary Contacts NO/NC |
| OPMNGSAAUX20 | Auxiliary Contacts NO/NO |
| OPMNGSA101 | Marking Tabs Marking Tab - Mounts to front of carrier, quantity 100 |
