Cable limiters & welder limiters,K Series (Tubular Terminal and Offset Bolt-Type Terminal)
Low Voltage Supplementary Fuses - Supplementary Fuses
Cable limiters & welder limiters
K Series (Tubular Terminal and Offset Bolt-Type Terminal)
Specifications
Decription:
Cable limiters.
Ratings:
Agency Information:
UL Listing: KDM, KDR, KDP and KFM, KCM, KCM-B and KCR.
Features and Benefits:
@ Sizes and ratings available to meet many applications.
Typical Applications:
@ Protecting low voltage distribution and service entrance cables against short-circuit currents.
Accessories:
| Boots can be purchased separately. | |
| @ KCM: Catalog # - ______Boot-KCM | @ KDM: Catalog # - ______Boot-KDM |
| Installation tools can be purchased separately from Thomas and Betts. | |
| @ Crimp Tool: TBM-14M | @ Die: 15506 KDM/15515 KDR |
Note:
*Copper or aluminum cable; sizes of all other limiters pertain to copper only.
1UL Listed (File E90818).
2Available with shrink tube i_V@ suffix.
3Available with molded rubber boots. Add inB@ to end of part number.
1UL Listed (File E90818).
2Available with shrink tube i_V@ suffix.
3Available with molded rubber boots. Add inB@ to end of part number.
Data Sheet:
| Catalog Number | Cable Size |
| KQV | #12 |
| KQT | #10 |
| KFZ | #8 |
| KIG | #6 |
| KDY | #4 |
| KDA | #2 |
| KDB | #1 |
| KDC | 1/0 |
| KDD | 2/0 |
| KDE | 3/0 |
| KDF | 4/0 |
| KDH | 250 MCM |
| KDJ2 | 350 MCM |
| KDM1,2,3 | 500 MCM |
| KDU | 600 MCM |
| KDR1,2 | 750 MCM |
