Cable limiters & welder limiters,68000 Series
Low Voltage Supplementary Fuses - Supplementary Fuses
Cable limiters & welder limiters
68000 Series
Specifications
Decription:
Welder limiters.
Construction:
Melamine tube with silver fuse
Ratings:
Features and Benefits:
i/Current-limiting devices designed specially for use on welder circuits only
i/Time-current characteristics are designed to hold on the intermittent overloading encountered in welder
operation, while providing short-circuit protection to the
circuit and equipment
i/Welder limiters have excess current capacity in the
operating range as needed for this type of service
i/Time-current characteristics are designed to hold on the intermittent overloading encountered in welder
operation, while providing short-circuit protection to the
circuit and equipment
i/Welder limiters have excess current capacity in the
operating range as needed for this type of service
Typical Applications:
@ Welder circuits
i/Because welder limiters have special characteristics, they are not intended for application on general-use circuits
i/Because welder limiters have special characteristics, they are not intended for application on general-use circuits
Data Sheet:
| Catalog Number | Fuse Holder Type | Nominal Amp Rating |
| 68150 | Class H | 150 |
| 68200 | Class H | 200 |
| 68300 | Class H | 300 |
| 68400 | Class H | 400 |
| 68600 | Class H | 600 |
| 64200 | Class J | 200 |
| 64300 | Class J | 300 |
| 64400 | Class J | 400 |
| 64600 | Class J | 600 |
